Wi-Fi Wireless Environmental Monitoring

RLE's WiNG and Wi-Fi wireless sensors monitor conditions in any critical space

RLE's Wi-Fi Wireless Environmental Monitoring RLE's WiNG wireless and Wi-Fi sensors were the company’s biggest seller in Q2 2020. Mission-critical facilities around the world rely on WiNG’s flexibility, reliability, and ease of setup to protect their critical assets. The WIFI-TH delivers temperature and humidity data via existing Wi-Fi networks and supports WPA and WPA2-PSK encryption. Though the WiNG-MGR can be standalone for alarm notification and trending, it can integrate into enterprise DCIM or BMS using BACnet, MODbus, or SNMP.

The WiNG-MGR has a line of 900 MHz and 868 MHz RF sensors and transmitters to monitor conditions such as differential air pressure, air velocity, leak detection, analog sensor input (0 V_DC to 5 V_DC, 0 V_DC to 10 V_DC, and 4 mA to 20 mA), digital input, 10k2 thermistor, and RDT input 1,000 Ω platinum along with temperature and humidity. RLE’s WiNG wireless has exceptional range and a battery life of up to 12 years to assist in the ongoing protection and visibility of environments for permanent or temporary monitoring solutions.

WiNG wireless is deployed in areas such as datacenters, healthcare, schools, universities, industrial plants, commercial buildings, warehouses, and hot/cold/wet/dry/dirty/clean storage. The WiNG-MGR (gateway) and WiNG-RXT (range extender) can pass data over 1,000 feet away line-of-sight using 900 MHz / 868 MHz RF radio transmission. The WiNG-TH and other WiNG sensors/transmitters communicate up to 600 feet away from the WiNG-MGR or WiNG-RXT with a 98% packet delivery success rate every 10 to 20 seconds. The WIFI-TH is programmed for interval data delivery from 1 to 30 minutes. 7-year battery life can be expected at transmission intervals of 5 minutes and a longer battery life for less critical spaces where 10+ minute data transmissions are acceptable.

IoT and Edge environments requiring integrated data to deliver BAS and IAQ optimization is driving demand for reliable wireless technology. RLE Technologies is located in Fort Collins, CO and is proud to manufacture almost all products in the USA.

Features

WiNG 900 MHz/868 MHz RF battery life up to 12 years
WIFI-TH battery life up to 7 years at 5-minute intervals
WiNG transmitters communicate up to 600 ft indoor direct line-of-sight
WiNG-RXT communicates up to 1,000 ft direct line-of-sight to the WiNG-MGR
98% packet transmission accuracy
Compact footprint with standard mounting options
WiNG-T and WiNG-TH include a magnet for quick and easy installation
Integrates BACnet, MODbus, and SNMP
Alarms and trends managed in the web user interface of IP enabled gateway (WiNG-MGR)
No software licenses

Applications

Temperature, humidity, and dew point in datacenters and MDF/IDF telecom rooms (WIFI-TH and WiNG-T/TH)
WIFI and WING temperature and humidity integration to optimize BAS performance and enable IAQ requirements and compliance reporting
Leak detection in mission-critical environments including all building types (WiNG-LD)
Measure differential air pressure in data centers, schools, commercial buildings, and healthcare to enable IAQ requirements (WiNG-DAP)
Measure air velocity typically under raised floors (WiNG-AIR)
Measure resistance from 10k2 thermistor input for fridge/freezer monitoring, hot/cold water supplies, and return temperatures with a pipe strap sensor, duct probes integrated to BAS for system optimization (WiNG-THRM)
Measure resistance from 1,000 Ω platinum RTD sensor for fridge/freezer monitoring, hot/cold water supplies, and return temperatures with a pipe strap sensor, duct probes integrated to BAS optimization (WiNG-RTD)
Contact closure monitoring and alarms such as smoke alarms, hydrogen/methane gas detection, door contacts, mechanical equipment alarms, and more (WiNG-DI)
Connect an output (0 V_DC to 5 V_DC, 0 V_DC to 10 V_DC, or 4 mA to 20 mA) from a 3^rd party sensor and transmit that value every 10 to 20 seconds (WiNG-ANLG)